What an LED display actually costs.
Almost nobody in this industry publishes prices. That is partly defensible — the specification really does move the number several-fold — and partly not, because it leaves buyers unable to sanity-check a quote before committing to five or six figures.
So this page collects what other suppliers do publish, quoted and attributed, and explains the eight things that move the price. It is a guide to the market, not a price list — including ours. When you want a number for your specific space, the wall planner will scope it in about a minute.
Published market rates
Every figure below was read from a named supplier's own public website in September 2026 — not from a search result about it. That distinction earned its keep: one widely-repeated “from $5,100” turned out to be $6,999 on the actual page, and two other suppliers we wanted to cite would not serve the request, so they are not quoted here at all.
These are not our prices, and they are not an “industry average”. They are what specific companies say in public, so you can check every one of them yourself.
UK & Ireland
| What | Published price | Source |
|---|---|---|
| Standard indoor LED panelsMid-pitch panels for a bar, gaming floor or foyer wall. | from £1,000 per m² | Dynamo LED Displays (UK), DX Series |
| Fine-pitch LED panelsClose-viewed walls — reception, control room, retail feature. | from £2,500 per m² | Dynamo LED Displays (UK), DFC Series |
| A complete video wallPanels, frame and processing as a package, before fitting. | from £8,900 + installation | Dynamo LED Displays (UK) |
| Single commercial display + CMSThe entry point for digital signage in Ireland — one screen, set up. | from around €900 | Intell Visual Displays (IE) |
United States
| What | Published price | Source |
|---|---|---|
| Complete indoor wall, 3m x 1.5m10ft x 5ft P3.9 turnkey package — panels, frame and processing. | $10,950about $2,360 per m² (our arithmetic) | DVS LED Systems, Vizra-3 |
| Finer-pitch indoor wall, 3m x 1.5m10ft x 5ft P2.9 turnkey package — a sharper pitch for closer viewing. | $9,950about $2,140 per m² (our arithmetic) | DVS LED Systems, Optic-ER2 |
| Outdoor IP65 wall, 3m x 1.5m10ft x 5ft P3.9 weather-sealed — the same size, rated for outside. | $12,950about $2,790 per m² (our arithmetic) | DVS LED Systems, Vizra-3IP |
| Coarser indoor wall, 2.9m x 1.9m9.5ft x 6.3ft P4.0 indoor — a bigger, coarser screen for longer viewing distances. | $6,999about $1,260 per m² (our arithmetic) | LED Nation USA |
The eight things that move the price
01Pixel pitch
The biggest single leverHalving the pitch roughly quadruples the pixel count, and the price follows. A P1.5 wall can cost two to three times a P2.6 wall of identical size. This is where most budgets are lost — to sharpness nobody standing in the room can actually perceive.
02Area, in real cabinets
Steps, not a smooth curveLED walls build from fixed cabinets, usually 500mm. A 3.7m wall is quoted as 3.5m or 4.0m, never 3.7m. Ask any supplier for the buildable size, not the size you asked for — this is the number that catches people out on fitting day.
03Environment
Roughly 2× between indoor and shop windowA screen facing out through glass into daylight needs around five times the brightness of the same screen hung indoors, plus better thermal management. Under-specifying brightness here is the most common and most expensive mistake in retail LED — the screen is unreadable by noon and cannot be fixed without replacing it.
04Structure and fixing
Typically 10–20% on top of panelsWall-mount on a sound masonry wall is cheap. Suspended, curved, freestanding, or anything needing a structural engineer's sign-off is not. Curved and custom-entry builds carry bespoke framework, which is where the difference between a catalogue price and a real quote usually sits.
05Processing and control
A fixed cost, not per m²Every wall needs a sending card, receiving cards and a processor sized to its resolution. A wall above 4K needs a considerably more capable processor than one below HD, which is why resolution matters to the budget even when the physical size does not change.
06Installation and commissioning
Often underquotedAccess equipment, power supply work, cable routing, calibration and content commissioning. A quote that omits the electrical supply and the first content build is not a quote you can compare against one that includes them.
07Content and CMS
The recurring oneHardware is a one-off; content is not. Budget for the initial creative build and for whoever keeps it current. A screen running the same loop for eighteen months has stopped earning its capital.
08Spares and warranty
Around 3–5%Buy spare cabinets and modules from the same production batch at the same time as the wall. LED bins drift between batches, so a module bought two years later can be visibly a different colour.
Before you compare two quotes
The cheapest quote is usually the one that leaves the most out. Ask every supplier — including us — to confirm in writing whether these are in or out:
- The electrical supply. Who is running power to the location, and is a new circuit needed?
- Access equipment. Scaffold, tower or MEWP for the install, and who is hiring it.
- The buildable size. Not what you asked for — what the cabinets actually make.
- The first content build. A screen with nothing on it is a very expensive mirror.
- Spares, from the same production batch. LED colour bins drift between batches.
- Who owns the CMS licence, and what it costs from year two.
Common questions
- Why won't suppliers publish LED display prices?
- Because the specification genuinely changes the price several-fold, and a single headline figure would mislead more often than it helps. Pixel pitch alone can move a like-for-like wall by a factor of three. That said, the ranges are knowable, and a supplier who cannot give you a per-square-metre band before a survey is being evasive rather than careful.
- What is the cheapest useful LED installation?
- In Ireland, a single commercial display with a content management system starts from around €900 according to published rates from Intell Visual Displays. That is a screen, not a video wall. A genuine modular LED wall starts higher — Dynamo LED Displays in the UK publish complete walls from £8,900 before installation.
- Is LED cheaper than reprinting static signage?
- It depends entirely on how often you currently reprint. A venue changing printed signage six times a year is spending meaningfully on print already, and that recurring cost is what an LED wall displaces. Our running cost calculator sets the electricity cost against your actual reprint spend so you can see the net position rather than only the capital number.
- What is usually missing from an LED quote?
- The four we see most often are the electrical supply work, access equipment for the install, the initial content build, and a spares allowance from the same production batch. Ask explicitly about all four before comparing two quotes, because a quote that excludes them will always look cheaper than one that does not.
- How long does an LED display last?
- Panels are typically rated around 100,000 hours to half brightness, which is well over a decade at normal operating hours. In practice the limiting factors are the processor generation, spares availability, and whether the brightness was specified correctly for the environment in the first place — an under-specified screen run at full output ages considerably faster.
Ready to make your presence exceptional?
Tell us about your venue and we'll design a display system built around it.